meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
install-x86 [2021/05/17 14:49]
a-wai Add flashing/installing instructions
install-x86 [2021/11/09 12:43] (current)
a-wai Refer to weekly builds instead of nightly
Line 6: Line 6:
 === Pre-built Images === === Pre-built Images ===
 We recommend downloading pre-built images for installation. The image files for your device will be packed in a file named ''​mobian-<​device>​-phosh-YYYYMMDD.img.gz''​ and can be found here: We recommend downloading pre-built images for installation. The image files for your device will be packed in a file named ''​mobian-<​device>​-phosh-YYYYMMDD.img.gz''​ and can be found here:
-  * [[https://​images.mobian-project.org/​surfacepro3/​nightly/|Surface Pro 3]]+  * [[https://​images.mobian-project.org/​surfacepro3/​weekly/|Surface Pro 3]] 
 +  * [[https://​images.mobian-project.org/​efi/​weekly/​|UEFI-based PC]] 
 +  * [[https://​images.mobian-project.org/​pc/​weekly/​|BIOS-based PC]]
  
 === Building from Debos Recipes === === Building from Debos Recipes ===
Line 29: Line 31:
 ==== Install Mobian to the Internal Storage ==== ==== Install Mobian to the Internal Storage ====
 Currently, there is no installer available for x86 devices, and their internal storage isn't easily exposed through USB. You can either use the live USB as-is, or manually install Mobian to your internal storage from the running live system: in order to do so, simply download the image (or copy it to the USB drive) and identify your internal storage device (on the Surface Pro 3 it should start with ''/​dev/​disk/​by-id/​ata-''​). Then repeat the flashing procedure, only this time targeting the internal storage device. Currently, there is no installer available for x86 devices, and their internal storage isn't easily exposed through USB. You can either use the live USB as-is, or manually install Mobian to your internal storage from the running live system: in order to do so, simply download the image (or copy it to the USB drive) and identify your internal storage device (on the Surface Pro 3 it should start with ''/​dev/​disk/​by-id/​ata-''​). Then repeat the flashing procedure, only this time targeting the internal storage device.
- 
- 
- 
-